flexibility-grey

FLEXIBILITY

fast-grey

EFFICIENCY

high-quality-02

QUALITY

Download V800.1 brochure

Automatic side seam serging unit

V800.1

The side seam serging unit is an important production requirement for the nowadays fashion industry. Beside the basic units it considerably increases the production output, providing a great support to the operator. The side seam serging unit has been specifically developed to grant a high quality result, even on stretch denim fabrics, automating multiple functions that before were completely made by the operator. The new pneumatic device for example, it’s improving the panel movement thanks to a sensors system. In terms of costs saving this unit is the benchmark in its category, installing a new cutting system working with a vacuum, granting a high rate of thread saving.

SIDE SEAM SERGING
PATENTED AIR-ASISTED TRANSPORT SYSTEM
EXTRA OIL SYSTEM WITH INTERCOOLER PUMP
VACUUM DEVICE AND SENSOR

PATENTED AIR-ASISTED TRANSPORT SYSTEM

The trasport system allows a well assisted handling of the fabric during the sewing operation

EXTRA OIL SYSTEM WITH INTERCOOLER PUMP

4 litres extra oil, always working at the maximum speed without any stop

VACUUM DEVICE AND SENSOR

Automatic cutting system connected with a vacuum device, with sensor for cut at begin and end of operation in an automatic and programmable way

4 thread overlock

Yamato sewing head

TECHNICAL SPECIFICATIONS

Sewing head: Yamato made in Japan 2 needle overlock
Speed: 6300 rpm
Max Speed: 7000 rpm
Overlock width: 4.0 mm up to 9.6 mm
Stitch per Inch: up to 30 (spi)
Sewing Machine Motor: Mitsubishi XCG 554 20Y – 550W
Power Supply Voltage: 220 V Single-Phase 50/60 Hz
Control Box: XCG MFY 2005
Air Consumption: 10L/min

FEATURES

  • The innovative pneumatic device controls a wheel that helps the handling on the fabric, especially on curves making the operator’s work easy and efficient and reducing the handling time
  • Pneumatic wheel allows to stitch any fabric from light to heavy, stretch or double stretch, straight or curved
  • Possibility to sew on the back panel with the back yoke already joint, thanks to the automatic back yoke joint detector
  • Special guide device with manual regulation for different fabric thickness
  • Larger opening table
  • Extra Pneumatic cylinder assistance on the cutting device

The accessories described here may not be included in the price of the machine. Please refer to the commercial documents for information on prices and conditions.